1¡¢Introduction
¡¡This product is a water-soluble nanoscale emulsion droplet made from mineral oil through a special emulsification process. The product not only has good lubrication effect, but also does not bubble and does not cause changes in viscosity and filtration amount.
2¡¢ Q/SH CG0182 2023 Sinopec Standard
project |
index | ||||
Type I(200C) |
Type I(150C) | ||||
exterior |
Flowing liquid |
Flowing liquid | |||
Density,g/cmi |
0.84ÍÁ0.05 |
0.87Ê¿0.05 | |||
Fluorescence level, ¡Ü |
4 |
4 | |||
BiodegradabilityBOD./CODo ¡Ý |
0.05 |
0.05 | |||
Apparent viscosity increase value£¬mPa¡¤s ¡Ü |
3 |
3 |
Q/SY17088-2016Chinese Petroleum Standards
project |
index | ||||
Regular type |
Low cost light type | ||||
Fluorescence level |
- |
¡Ü 5.0 | |||
Apparent viscosity increase value£¬mPas |
¡Ü5.0 | ||||
Density change value£¬g/cm; |
¡Ü0.08 | ||||
Reduction rate of clay cake adhesion coefficient£¬% |
¡Ý50.0 | ||||
Reduction rate of lubrication coefficient£¬% |
¡Ý80.0 | ||||
Either the reduction rate of mud cake adhesion coefficient or lubrication coefficient can be selected according to the requirements. |
3¡¢ Applicable scope
This product is suitable for various water-based drilling fluid systems, especially in horizontal wells and highly deviated wells, with good performance.
4¡¢ Usage and Dosage
This product can be directly added to the circulating mud, with a recommended initial dosage of 1% -3% of the circulating mud volume.
5¡¢ Packaging and storage
Packaging and storage: This product is a milky white viscous liquid, and can be packaged in plastic or iron drums of 50, 100, or 200 kilograms according to user needs. The product should be stored in a cool, ventilated, and dry place.
The shelf life of the product is one year.
6¡¢ Execution standards
Q/SY17088-2016 China Petroleum Standard Q/SH CG0182 2023 China Petrochemical Standard
<< Previous:Unidirectional pressure sealing agent for drilling fluid (Q/SHCG52-2013) >>Next:Drilling fluid plugging agent (modified plant fiber) (Q/SY1096-2012)